- Overview
- oke
- ase
- Njikọ Ngwaahịa
- Pneumatic test pressure: up to 0.6Mpa..
- Clamping method: hydraulic clamping.
- Detection method: air pressure bubbling method, direct pressure leak detector.
- Clamping tooling stroke: 200mm.
- Pool stroke: 200mm.
- The maximum height of the wheel placement space: 400mm.
- The diameter range of the tested wheel hub: 150-400mm.
The equipment adopts hydraulic clamping method,Bubble method for testing. Hydraulic clamping tooling is used to seal the upper and lower end caps of the hub, and high-strength gaskets are used to seal the upper and lower ends.It hasthe advantages of high control accuracy, and the pressure can be adjusted steplessly.
oke | data |
Nrụgide ule | within 6bar |
izi ezi njikwa nrụgide | ± 0.5% |
Pressure value resolution | 0.1kpa |
Ihe mmetụta | 0.5nke |
Nwale ọkara | ikuku nro |
Pressure control method | manual, touch screen |
Oru oru | akpaka |
ikwu iru mmiri | |
Sample installation method | hydraulic clamping |
Ngwakọta ihe owuwu | pressure control system, hydraulic clamping system |